Know Your Computer Have Virus



1. Computer Becomes Slow.
On own rather, virus infected computers will be slow because the virus is running in tandem with the operating system and it is in the computer's memory. In addition, your computer is slow because the virus is doing his dirty work like disturbing your computer from functioning as it should.

2. Can Not Open the Registry Editor.
Registry editor is used to change the setting on the computer registry anda.Dengan use, you can prevent anyone to enter your computer network, changing policies and so on. Can not Open Task Manager. Task manager is usually used to view software or tasks being undertaken by the computer. Virus disabling task will managersupaya you can not see the virus is doing.

3. Folder Option Missing.
Folder option is used to view or set the properties of a file.
Virus may disappear and not allow you to
see them by eliminating the option of folders.

4. Become Slow Start Up Process.
Start-up process is a process carried out every time your computer is turned on. A growing number of processes to be carried out, the slower your computer. Usually take advantage of the computer running the code on every virus we start up process.

5. Some Software Can not Be Installed.
There are some viruses that will prevent you from installing new software. For example, a virus that prevents you from installing antivirus software.

6. Can not Print Documents.
There are viruses that control the printer by disabling the cetak.Ini cause you failed to print any document.

To Know The Wi-Fi Password Which Was Entered Before


Usually when you have to get the password for the Wi-Fi network, it will be entered automatically every time you are in the area, so you do not have to remember it again.

How about you also igin share passwords with other people? That's easy, you can get it back. First press on the icon Wi-Fi on your taskbar, and select '"Open Network and Sharing Center".

From the left sidebar, select "Manage wireless networks"

Right click on the Wi-Fi network you want to know, and select 'Properties'.

Go to the 'Security' tab, and tick the box "Show characters". You will see that the password has been entered for the Wi-Fi network.

Laptop Care Tips



Laptop generate a lot of heat, particularly if you menggnakan latest software. Too hot, you risk damaging your motherboard.

Heat sink collect dust after 6 months

Make sure your laptop has good ventilation, and make sure you do not block air flow from the fan because it was the only laptop in the air space!

Make sure you send your laptop to a specialist to service your laptop fan to wash the dust when:

1) Laptop you warm on the fan.
2) Every 6 months.

This is a critical problem that all laptop users do not know until they damaged laptop. After a while your laptop will definitely trap dust in the processor fan.

This causes poor ventilation then laptop will over heat and damage the component parts such as laptop motherboard and processor

Believe me, if you adopt this attitude, you will not fall from the people who have to bear the cost of hundreds of dollars to change the motherboard as most of our customers!
Be careful with your LCD screen

Avoid touching the LCD screen or play with you.

You may be damaged LCD lines, white, dark, no lights. shaking concussion, so TV is damaged. green, red or yellow.

To avoid breaking or cracking

Make sure you do not put
  • keys,
  • coin
  • ring
  • pen drive
  • Broadboand USB dongle

Do not drop your laptop!

Sometimes we can not avoid unwanted things, but we can reduce its impact. Always use a quality laptop bag (though heavy) Avoid using laptop bag beautiful outside but does not cover!

Do not carry your laptop in a bag without saving it first! make it a practice!

Do not park on the side edge of the table or a place that is not stable.
  •  LCD screen, hinge (very difficult find)
  •  Cover (very bad times wanted to see)
  •  Frame (again very difficult to find)
  •  Hard Disk (easily replaced but data can not substitute)

Make sure the rubber should be under the laptop is still available and is in good condition. This prevents them from accidentally slipping.

Do not place beverages close

If you have to drink when you are using a laptop, make sure you do not spill it.

A few drops in your drink if spilled on the laptop can make you huge losses.

Keyboard, motherboard and hard disk is at risk of damage.
You definitely do not want to spend hundreds of dollars for a few drops of water right?

Say no to a virus!

Intelligent laptop users are bound to have the best anti virus

Make sure you buy a quality antivirus and refrain from using free antivirus. This is because free antivirus does not have all the security features such as antivirus premium paid. Kaspersky Internet Security 2012, Avast Internet Security, BitDefender antivirus is among the best in the market.

Also make sure you update your antivirus definitions. Otherwise it is useless and your laptop will be exposed to thousands of new viruses are dangerous.

Most antivirus now auto update so you do not dizzy to think about it.

Tips On Taking Care Of Your Laptop Battery



1) If your battery is new - Make sure your battery is completely empty when you first use it.

2) Then, NO 'on' the laptop, the battery charge for eight (8) hours. If 'indicator on the laptop says the battery is full, continue charge up to eight (8) hours. Remember! Never once 'on' the laptop!

3) After eight (8) hours, unplug the charger / adapter from the laptop. And to ONLY use batteries, use the laptop until the battery is almost depleted. This will set how much power can be stored in the battery

4) After this, you can charge it as usual until the indicator shows that the battery is full

Habits to Avoid

1) Avoid always charge the battery-A laptop battery has a life span of about 300 to 500 rounds charge. Unplug the charger, use battery power and then use the charger back is a round. It is advisable that you do not use battery power until completely exhausted. Leave at least 5% of the power available. It is better if you use the battery for an hour and then charge a full refund (this is calculated per round), instead of 10 minutes and recharge the battery back 5 minutes (this is calculated per cycle)

2) Make sure your batteries run out of power every 30 pusingan.Kemudian fully recharge. This will help set the pace battery power

3) If you do not want to use the battery for more than 3 weeks, make sure you keep at least 50% of the power in the battery.
If you leave with full power, the battery will swell and can save a lot of power if you do not keep direct power, feared the battery is not rechargeable.

4) Avoid heat, heat can reduce the storage capacity of the battery. Do not use the laptop on a surface that trap heat like the fabric, cushions, leather sofa, your thighs, blankets and more. Use a notebook cooling pad and make sure the surface you are using does not have dust.

5) Avoid over-charging (overcharging) - Overcharging will cause heat and reduce the quality of the battery. Unplug the charger when the 'indicator' already indicates that the battery is full.

Your Computer Is Not Problem



When on your computer or laptop just nothing out on the monitor display / screen or laptop computer. I want to share with you what you can do first before going to the computer store or call a technician. Chances are your computer is damaged probably just a minor problem. this follow the steps below:

1. Open the computer casing or cover RAM for laptop (do not SCARED, no further cases of the computer eating people. Hehe)

2. Open RAM RAM and clean the feet with rubber eraser.

3. Reinstall the RAM and on the computer or laptop.

You will be surprised that the display on the screen comes back. 

If there is no exit any display on the monitor screen that, then you phone technician to come to your home or go in person to a computer service center.

Installation Your Computer (PC Assemble)



"Step By Step" Installing Your Own Computer

Here is the step by step how to install computer,

Level in computer installation consists of:

A. PREPARATION
B. INSTALLATION
C. TESTING
D. HANDLING PROBLEMS (TROUBLE SHOOTING)

A. PREPARATION

Good preparation will facilitate the installation of computers and avoid problems that may arise. Related issues in preparation include:

1. Computer Configuration Determination
2. Preparation Components and Supplies
3. Security

1. Computer Configuration Determination

Computer configuration associated with the determination of the types of components and functions and how all components can work as a suitable computer system desires. Determination of the type of processor initiated component, motherboard, and other components. Factors suitability or compatable from components on the motherboard should be noted, because each type of motherboard has a kind of processor, memory modules, ports and I / O bus are different.

2. Preparation Components and Equipment

Computer components need to be completed beforehand to facilitate installation. Complete equipment consists of:

• Computer Components
• Equipment components such as cables, screws, jumpers, bolts etc.
• manual and reference book of the component
• Tools such as flat and Philips screw driver
• Software operating system, device drivers and software applications.

The user is required as a reference to know the position of the element connection diagram (connectors, ports and slots) and element configuration (jumpers and switches) as well as the way that your computer settings are installed. Software CD is required to install the operating system, device drivers from the device, and application program on the computer finishes installing

3. Security

Security measures needed to avoid problems such as component damage by static electricity, falls, over heating and liquid spills. Prevention due to static electricity by:

• Use anti-static bracelet or touching a metal surface on the chassis before holding the components to remove static load.
• Do not directly touch the electronic components, connectors or the network but hold on a metal or plastic body found on components.

B. INSTALLATION

Level computer installation process consists of:

1. Preparation motherboard
2. Installing the Processor (CPU)
3. Installing the Heatsink
4. Installing the Memory Module
5. Installing the Motherboard in Casing
6. Installing the Power Supply
7. Installing the Motherboard Cables & Casing
8. Installing the Drive
9. Installing the Adapter Card
10. Final Solution

1. Preparation motherboard

Check your motherboard manual book to see where the setting equipment components.

2. Installing the Processor (CPU)

Processors more easily installed before the motherboard is installed in the casing. I install the processor socket and slot types are different

Determine the position of pin 1 on the processor and the processor socket on the motherboard, usually located at the ends marked with dots, triangles or depressions.
Raise the locking lever position socket to open.
Insert the processor into the socket by first coordinating position the feet processors with socket holes. bowed, until there is no space between the processors with socket.
Lower the locking lever back.

3. Installing the Heatsink

Function of heatsink is remove heat generated by the processor. For heat transfer mengoptimamkan the heatsink should be installed close to the top of the processor with some of the retaining clip on the heatsink surface coated conveyor gene heat (thermal grease). Heatsink comes with a fan to connect power to the fan connector to the motherboard.

4. Installing the Memory Module (RAM)

Each type of memory module SIMM, DIMM and RIMM are distinguished by the position of the recess on the side and bottom of the module.

How to install for each type of memory module as follows.

Type SIMM

1. Adjust indentation position on the knob on the module slot.
2. Install the module by making oblique angle of 45 degrees in slot
3. Push to vertical module slot, the locking lever on the slot will automatically lock the module.

Type DIMM and RIMM

How to install DIMM and RIMM modules same and there is only one way that will not be overturned because there are two depressions as a guide. Perbedaanya DIMM and RIMM indentation position

Lay down locking hook on the end of the slot
Adjust indentation position on the knob on the module connector slot. and enter the module into the slot.
Hooks locks automatically lock when the RAM slot is already installed.

5. Installing the Motherboard in Casing

The motherboard is attached to the casing with a screw and holder (Standoff). Method of attachment is: -
  • Determine the position of the holes for each plastic and metal seat. Hole for metal seat (metal spacer) is marked by a ring on the edge of the hole.
  • Install metal or plastic holder on the tray casing according to the position of each seat hole motherboard.
  • Place the motherboard on the casing until the head holder tray out of the holes on the motherboard. Install the locking screws on each metal holder.
  • Install frame I / O ports (I / O sheild) on the motherboard if any.
  • Install the tray casing already installed the motherboard in the casing and lock with screws.


6. Installing the Power Supply

Several types of casings are equipped power supply. When the power supply not included then the installation as follows:

Enter the power supply on the shelf in the back of the casing. Install four screws fastening seed.
Connect the power connector from the power supply to the motherboard. ATX power connector types have only one installation of up to not be upside down .. Connect the power cable to the fan, if wearing a cooling fan for the CPU.

7. Installing the Motherboard Cables and Casing

Once the motherboard is installed in the casing next step is to install the cable I / O panel on the motherboard and the casing.
  • Attach the data cable to the floppy in the floppy drive controller on the motherboard (if any)
  • Attach the IDE cable on the primary and secondary IDE connector on the motherboard. (Now cable SATA)
  • On the back of the casing there is a hole to install additional port non slot type. Open the cover plate locking screw hole connector port and enter the port that is to be installed and install the screws back.
  • When the mouse is not yet available port on the back of the card casing mouse connector should be installed then connected to the mouse connector on the motherboard.
  • Ties cable connectors on the front panel of the switch casing, LED, internal speakers and ports installed in front of the casing when there is to the motherboard. Check your motherboard diagram to find the exact location of connectors.


8. Installing the Drive

Install procedure hardisk drive, floppy, CD-ROM, CD-RW/DVD is the same as the following:
  • Open / remove the drive bay cover (space to drive on the casing)
  • Enter from the front of the drive bay with the prior set the jumpers (master / slave) on the drive.
  • Adjust the position of the screw holes on the drive and then install casing retaining screw drive.
  • Connect the IDE cable connector to the motherboard padai drive (primary connector used earlier)
  • When the IDE cable connected to the drive jumper settings make sure differences ie both the first drive is set as the master and the other as the slave.
  • Secondary IDE connector on the motherboard can be used to connect two additional drives.
  • Floppy drives connected to the motherboard floppy connector specific
  • Connect the power cable from the power supply to the drive.


9. Installing the Adapter Card

Common adapter card installed is graphic cards, sound, network, modem and SCSI adapters. Graphic card must be installed before any other adapter card. I install the adapter:

Hold the adapter card at the edges, avoid touching components or electronic networks. Press card to get on the right connector on the motherboard expantion slot
Install the retaining screws to the chassis card
10. Final Solution

Install the chassis cover
  • Cord Power cable connect to a wall socket.
  • Attach the monitor to the port connector graphic card.
  • Connect the keyboard cable connector and mouse connector into the mouse port or serial port (depending on type of mouse).
  • Connect other external Devices such as a speaker, joystick, and microphone when there is a suitable port. Check the manual of the card to ensure that the location of the port adapter.


Laptop Adapter Care Tips



1) Make sure you use a charger that is specifically for your laptop. If you use a laptop charger that is not for you, the possibilities of your laptop is damaged is high.

2) Put your laptop charger in a place not near water. This is to prevent you right from electric shock and damage your laptop.

3) Always unplug your charger andabila charger is too hot. This is to prevent it from spoiling and damaging the laptop. You are advised to disconnect the charger when the battery is full. This while keeping your battery and charger.

4) When using the charger, it would be better removing the battery. When using the battery it is better to disconnect the charger. To charge the battery of your laptop it is baikjika is 'OFF'

5) When using the charger for a long time, put it on a surface that does not trap heat like the fabric, cushions, leather sofa, your thighs, blankets and more. This is to avoid over-heat.

6) Wire from the charger should be avoided contact with sharp objects such as torn corner table. If the charger wire is torn, do not use anymore. Do not wrap the wire charger with 'tape' or other material. Electric shock and damage to the laptop can occur. Change and buy a new charger.

Increase Your Internet Speed



If you feel slow to load internet browser page, here I want to share how to improve page load for internet explorer and mozilla firefox to 4 times faster.

Microsoft Internet Explorer

  • Go to "Start" and click "Run" or for users vista or windows 7, go to start and use the search.
  • Type "regedit" and press "Ok" and the Registry Editor will open.
  • Expand "HKEY_CURRENT_USER"
  • Expand Software, Microsoft, Windows, Current Version
  • Click on the Internet Settings
  • MaxConnectionPer1_0Server and MaxConnectionPerServer show maximum number of connections per page
  • Double click on one of the registries for change.
  • Set the Decimal radio button and add value from default to a higher value,example 10. Do the same on the other one registry.


Mozilla Firefox

  • Open Firefox and type about: config in the address bar and press "Enter".
  • Filter Type network.http.pipe the search bar above.
  • Double click on network.http.pipelining string to convert to the true values​​.
  • If you use a proxy, network.http.proxy.pipelining set to true.
  • Double click on network.http.pipelining.maxrequests string to convert interger value to 35.
  • Right click on any of the Configuration screen and select "New" and then "Boolean".
  • Enter browser.turbo.enabled as new Boolean name and click "Ok". Now set the Boolean value to true.

* You can also install Fasterfox Plugin. This increases the speed Firefox Plugin.

 
Message : Like My FB Page
Copyright © 2011. Laptop | Computer | Monitor | Software | Hardware | Maintenance Care - All Rights Reserved
Get Tips and Trick Here Happy Reading
Proudly powered by Blogger